Product Description
3d printed palisade security fence and gates , also included is the feet option where you can clip 2 sections of fence into 1 foot section, feet sections can be easily cut with a sharp knife if you only require 1 fence, fence panels can be bent at a 90 degree angle with some slight heat without breaking so it makes it easy to go round corners, Or you can just use the fence by itself and UHU glue them in place the option is yours. The pictures show the fence in use on my own layout where I have just glued it in place the gates come with a post that will require a 2mm hole if you want to pose it open and closed or you can just cut the base off the pole and glue them in the desired position.
Pack contents.
8x fence sections 5cm long, 2mm Thick & 2.5cm high
2x large gates each 5cm long 2mm Thick & 2.5cm high
1x side gate 1.5 cm long, 2mm thick & 2.5cm high
12x decal signs, 4x mad dog security, 4x keep out private property, 4x smile you are on camera
4x feet strips each strip holds 2 fence sections.
Each pack will make up a length of 1/2 a metre approx 50cm.
